4-lead nema 23 stepper motor 76mm 270oz-in with support driver 128 micsteps CNC

  • Unit Type: piece
  • Package Weight: 2.0kg (4.41lb.)
  • Package Size: 15cm x 15cm x 15cm (5.91in x 5.91in x 5.91in)
Availability: In stock

SKU: s47

$49.99


This item includes:
1pc nema 23stepper motor23HS8430 76MM ,270OZ-IN
1pc stepper motor driver DM542 ,18-50VDC
M odel : 23HS8430
Frame Size: NEMA23
Step Angle: 1.8 degree
Voltage: 3.0V
Current: 3.0 A/phase
Resistance: 1.0Ohm/phase
Inductance: 3.5mH/phase
Holding torque: 270oz-in(190n.cm)
Rotor inertia: 480g-cm2
Detent torque: 660g-cm
Number of wire leads: 4
Weight: 1.0kg
Length: 76mm
MOTOR SHAFT 6.35mm
Front shaft length 21mm
Manual of 2-phase hybrid stepper motor driver DM542
Introduction:
DM542 is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC to 50VDC . It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM542 run under high speed is also significantly higher than the other two-phase driver, what is more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, Computer embroider machine, packing machines and so on.
Features:
l High performance, low price
l Average current control, 2-phase sinusoidal output current drive
l Supply voltage from 24VDC to 50VDC
l Opto-isolated signal I/O
l Overvoltage, under voltage, overcorrect, phase short circuit protection
l 15 channels subdivision and automatic idle-current reduction
l 8 channels output phase current setting
l Offline command input terminal
l Motor torque is related with speed, but not related with step/revolution
l High start speed
l High hording torque under high speed
Electrical specification:
Input voltage
24-50VDC
Input current
Output current
1.0A~4.2A
Consumption
Consumption:80W; Internal Insurance:6A
Temperature
Working Temperature -10~45oc;
Stocking temperature -40oc~70oc
Humidity
Not condensation, no water droplets
gas
Prohibition of combustible gases and conductive dust
weight
200G
The first three bits (SW 1, 2, 3)of the DIP switch are used to set the dynamic current. Select a setting
Closest to your motor is required current
Output current (A)
SW1
SW2
SW3
PEAK
RMS
ON
ON
ON
1.00
0.71
OFF
ON
ON
1.46
1.04
ON
OFF
ON
1.91
1.36
OFF
OFF
ON
2.37
1.69
ON
ON
OFF
2.84
2.03
OFF
ON
OFF
3.31
2.36
ON
OFF
OFF
3.76
2.69
OFF
OFF
OFF
4.20
3.00
4) Semi-flow function:
Semi-flow function is that there is not step pulse after 500 ms, the driver output current automatically reduced to 70% of rated output current, which is used to prevent motor heat.
4. Power connections
(1)+ v ,GND:Power Supply.
+V: Power supply, 16~50 VDC, Including voltage fluctuation and EMF voltage. The max current is 5A.
(2) A+ A- B+ B-:Connecting 2 phase stepper motors.
The driver & 2-phase hybrid stepping motor use four-wire connection, the motor can be connected in parallel & series bipolar. As for bipolar connection, it is higher performance with high-speed, but the current of driver is larger (it is 1.73 times more than the motor winding current).
Connecting in series, the driver \'s current is equal to the motor winding one.

Holding Torque 1.9N.M (270OZ-IN)Type HybridPhase 2Current / Phase 3ACertification CE,ISO,ROHSStep Angle(degrees) 1.8Model Number 23HS8430support driver DM542application -1 engrving machineapplication -2 packing machineapplication -3 DispenserPlace of Origin China (Mainland)is_customized Yes

Tags: nema 23 stepper motor, stepper motor, nema 23, Cheap nema 23 stepper motor, High Quality stepper motor, China nema 23 Suppliers.

Write a Review

Rating